Attofarads to nanofarads converter
Convert attofarads (aF) to nanofarads (nF). Calculate any value, follow the unit-factor steps and check a conversion table.
Updated · How we checkUse a decimal point, such as 2.5. Enter a value in aF; the result is in nF.
Formula
Worked example
Convert 1 aF to nF:
1 aF ≈ 1e-9 nF
Multiply your aF value by the factor above. The calculator uses the full conversion factor before rounding the displayed answer.
Attofarads to nanofarads table
Reference values rounded to 10 significant digits. Use the converter above for other amounts.
| Attofarads (aF) | Nanofarads (nF) |
|---|---|
| 0.1 | ≈ 1e-10 |
| 0.5 | ≈ 5e-10 |
| 1 | ≈ 1e-9 |
| 2 | ≈ 2e-9 |
| 5 | ≈ 5e-9 |
| 10 | ≈ 1e-8 |
| 25 | ≈ 2.5e-8 |
| 50 | ≈ 5e-8 |
| 100 | ≈ 1e-7 |
| 1000 | ≈ 0.000001 |
What attofarads measure
Attofarads (aF) represent capacitance. One unit equals 10^-18 F. One farad is the capacitance that stores one coulomb of charge per volt.
Reading the result in nanofarads
Nanofarads (nF) represent capacitance. One unit equals 10^-9 F. One farad is the capacitance that stores one coulomb of charge per volt.
Where this conversion helps
Compare capacitance values on components and in circuit calculations. Capacitance conversion does not specify voltage rating, leakage, tolerance or energy safety.
How the scale changes
The input unit has a factor of 1e-18 F; the output unit has a factor of 1e-9 F. Multiply the entered number by the input factor, then divide by the output factor. The physical quantity stays the same while its numerical representation changes.
Reading very small or large results
Scientific notation keeps very small and large values readable: 2.5e-6 means 0.0000025. The converter calculates with 50 significant digits internally and displays up to 10. Exact unit definitions do not remove uncertainty from the original measurement.
References
Definitions and method references. Example rates and prices on this page are editable assumptions.