Centisiemens per meter to gigasiemens per meter converter
Convert centisiemens per meter (cS/m) to gigasiemens per meter (GS/m). Calculate any value, follow the unit-factor steps and check a conversion table.
Updated · How we checkUse a decimal point, such as 2.5. Enter a value in cS/m; the result is in GS/m.
Formula
Worked example
Convert 1 cS/m to GS/m:
1 cS/m ≈ 1e-11 GS/m
Multiply your cS/m value by the factor above. The calculator uses the full conversion factor before rounding the displayed answer.
Centisiemens per meter to gigasiemens per meter table
Reference values rounded to 10 significant digits. Use the converter above for other amounts.
| Centisiemens per meter (cS/m) | Gigasiemens per meter (GS/m) |
|---|---|
| 0.1 | ≈ 1e-12 |
| 0.5 | ≈ 5e-12 |
| 1 | ≈ 1e-11 |
| 2 | ≈ 2e-11 |
| 5 | ≈ 5e-11 |
| 10 | ≈ 1e-10 |
| 25 | ≈ 2.5e-10 |
| 50 | ≈ 5e-10 |
| 100 | ≈ 1e-9 |
| 1000 | ≈ 1e-8 |
What centisiemens per meter measure
Centisiemens per meter (cS/m) represent electrical conductivity. One unit equals 10^-2 S/m. Electrical conductivity characterizes how readily a material conducts current; the SI unit is siemens per meter.
Reading the result in gigasiemens per meter
Gigasiemens per meter (GS/m) represent electrical conductivity. One unit equals 10^9 S/m. Electrical conductivity characterizes how readily a material conducts current; the SI unit is siemens per meter.
Where this conversion helps
Compare material or solution conductivity values reported at the same conditions. Temperature, composition and geometry matter. Conductivity differs from the conductance of a complete sample.
How the scale changes
The input unit has a factor of 1e-2 S/m; the output unit has a factor of 1e9 S/m. Multiply the entered number by the input factor, then divide by the output factor. The physical quantity stays the same while its numerical representation changes.
Reading very small or large results
Scientific notation keeps very small and large values readable: 2.5e-6 means 0.0000025. The converter calculates with 50 significant digits internally and displays up to 10. Exact unit definitions do not remove uncertainty from the original measurement.
References
Definitions and method references. Example rates and prices on this page are editable assumptions.