Decasiemens per meter to petasiemens per meter converter

Formula

Worked example

Convert 1 daS/m to PS/m:

1 daS/m ≈ 1e-14 PS/m

Multiply your daS/m value by the factor above. The calculator uses the full conversion factor before rounding the displayed answer.

Decasiemens per meter to petasiemens per meter table

Reference values rounded to 10 significant digits. Use the converter above for other amounts.

What decasiemens per meter measure

Decasiemens per meter (daS/m) represent electrical conductivity. One unit equals 10^1 S/m. Electrical conductivity characterizes how readily a material conducts current; the SI unit is siemens per meter.

Reading the result in petasiemens per meter

Petasiemens per meter (PS/m) represent electrical conductivity. One unit equals 10^15 S/m. Electrical conductivity characterizes how readily a material conducts current; the SI unit is siemens per meter.

Where this conversion helps

Compare material or solution conductivity values reported at the same conditions. Temperature, composition and geometry matter. Conductivity differs from the conductance of a complete sample.

How the scale changes

The input unit has a factor of 1e1 S/m; the output unit has a factor of 1e15 S/m. Multiply the entered number by the input factor, then divide by the output factor. The physical quantity stays the same while its numerical representation changes.

Reading very small or large results

Scientific notation keeps very small and large values readable: 2.5e-6 means 0.0000025. The converter calculates with 50 significant digits internally and displays up to 10. Exact unit definitions do not remove uncertainty from the original measurement.