Deciliters per second to gigaliters per second converter
Convert deciliters per second (dL/s) to gigaliters per second (GL/s). Calculate any value, follow the unit-factor steps and check a conversion table.
Updated · How we checkUse a decimal point, such as 2.5. Enter a value in dL/s; the result is in GL/s.
Formula
Worked example
Convert 1 dL/s to GL/s:
1 dL/s ≈ 1e-10 GL/s
Multiply your dL/s value by the factor above. The calculator uses the full conversion factor before rounding the displayed answer.
Deciliters per second to gigaliters per second table
Reference values rounded to 10 significant digits. Use the converter above for other amounts.
| Deciliters per second (dL/s) | Gigaliters per second (GL/s) |
|---|---|
| 0.1 | ≈ 1e-11 |
| 0.5 | ≈ 5e-11 |
| 1 | ≈ 1e-10 |
| 2 | ≈ 2e-10 |
| 5 | ≈ 5e-10 |
| 10 | ≈ 1e-9 |
| 25 | ≈ 2.5e-9 |
| 50 | ≈ 5e-9 |
| 100 | ≈ 1e-8 |
| 1000 | ≈ 1e-7 |
What deciliters per second measure
Deciliters per second (dL/s) represent volume flow rate. One unit equals 10^-4 m³/s. Volume flow rate is volume transported per elapsed time; one liter per second is 0.001 cubic meters per second.
Reading the result in gigaliters per second
Gigaliters per second (GL/s) represent volume flow rate. One unit equals 10^6 m³/s. Volume flow rate is volume transported per elapsed time; one liter per second is 0.001 cubic meters per second.
Where this conversion helps
Scale a reported flow rate without changing its reference conditions. Actual and standard gas flow rates can differ. This tool does not perform pressure or temperature compensation.
How the scale changes
The input unit has a factor of 1e-4 m³/s; the output unit has a factor of 1e6 m³/s. Multiply the entered number by the input factor, then divide by the output factor. The physical quantity stays the same while its numerical representation changes.
Reading very small or large results
Scientific notation keeps very small and large values readable: 2.5e-6 means 0.0000025. The converter calculates with 50 significant digits internally and displays up to 10. Exact unit definitions do not remove uncertainty from the original measurement.
References
Definitions and method references. Example rates and prices on this page are editable assumptions.