Femtoliters per second to decaliters per second converter
Convert femtoliters per second (fL/s) to decaliters per second (daL/s). Calculate any value, follow the unit-factor steps and check a conversion table.
Updated · How we checkUse a decimal point, such as 2.5. Enter a value in fL/s; the result is in daL/s.
Formula
Worked example
Convert 1 fL/s to daL/s:
1 fL/s ≈ 1e-16 daL/s
Multiply your fL/s value by the factor above. The calculator uses the full conversion factor before rounding the displayed answer.
Femtoliters per second to decaliters per second table
Reference values rounded to 10 significant digits. Use the converter above for other amounts.
| Femtoliters per second (fL/s) | Decaliters per second (daL/s) |
|---|---|
| 0.1 | ≈ 1e-17 |
| 0.5 | ≈ 5e-17 |
| 1 | ≈ 1e-16 |
| 2 | ≈ 2e-16 |
| 5 | ≈ 5e-16 |
| 10 | ≈ 1e-15 |
| 25 | ≈ 2.5e-15 |
| 50 | ≈ 5e-15 |
| 100 | ≈ 1e-14 |
| 1000 | ≈ 1e-13 |
What femtoliters per second measure
Femtoliters per second (fL/s) represent volume flow rate. One unit equals 10^-18 m³/s. Volume flow rate is volume transported per elapsed time; one liter per second is 0.001 cubic meters per second.
Reading the result in decaliters per second
Decaliters per second (daL/s) represent volume flow rate. One unit equals 10^-2 m³/s. Volume flow rate is volume transported per elapsed time; one liter per second is 0.001 cubic meters per second.
Where this conversion helps
Scale a reported flow rate without changing its reference conditions. Actual and standard gas flow rates can differ. This tool does not perform pressure or temperature compensation.
How the scale changes
The input unit has a factor of 1e-18 m³/s; the output unit has a factor of 1e-2 m³/s. Multiply the entered number by the input factor, then divide by the output factor. The physical quantity stays the same while its numerical representation changes.
Reading very small or large results
Scientific notation keeps very small and large values readable: 2.5e-6 means 0.0000025. The converter calculates with 50 significant digits internally and displays up to 10. Exact unit definitions do not remove uncertainty from the original measurement.
References
Definitions and method references. Example rates and prices on this page are editable assumptions.